Om Petro Lubes

Finelube Hydraulic 68 Is Fine Quality Hydraulic Oil Being Used In Hydraulic Systems Of Industrial Macjinery & Jcb & Cranes

JCB Optimum Performance (OP) Hydraulic Fluid 68 is a quality, shear stable top tier hydraulic oil. It has been developed for off highway equipment and other hydraulic systems exposed to wide temperature fluctuations. This is a Maximum efficiency Hydraulic Fluid (MEHF).

Safety Data Sheets (SDS)

 Product Data Sheets (PDS)

View all 7 grades of Mobil DTE 10 Excel™ Series
 
Mobil DTE 10 Excel™ Series are high performance anti-wear hydraulic oils specifically designed to meet the needs of modern, high pressure, industrial and mobile equipment hydraulic systems.
The Mobil DTE 10 Excel Series is constructed from selected base oils and a proprietary additive system to provide well balanced performance in a range of applications.  The products exhibit outstanding oxidation and thermal stability allowing long oil life and minimized deposit formation in severe hydraulic systems using high pressure, high output pumps.  The innovative ultra keep clean performance protects critical hydraulic system components from malfunction, such as tight tolerance servo and proportional valves found in many modern hydraulic systems.  The shear stable, high viscosity index allows for a wide operating temperature range maintaining maximum hydraulic efficiency and component protection at both low and high temperatures.  Outstanding air release properties provide an added measure of protection in systems with low residence time helping to prevent cavitation damage and micro dieseling.  The carefully selected base oil and additives allow passing results of acute aquatic toxicity testing (LC-50, OECD 203) and the zinc free anti-wear system provides a high degree of protection in gear, vane and piston pumps while also minimizing deposit formation.
Formulated with extensive laboratory and in-service field testing, the Mobil DTE 10 Excel series can help provide quantifiable increases in hydraulic efficiency compared to other Mobil™ hydraulic oils.  This can translate to reduced power consumption or increased machine output, resulting in monetary savings.
In controlled laboratory efficiency testing, Mobil DTE 10 Excel was measured to provide up to a six percent improvement in hydraulic pump efficiency compared to Mobil DTE 20 when operating in standard hydraulic applications.

ENKLO  grades are fire resistant hydraulic fluids based on organic ester. These fluids meet the HFDU classification system as per European Mines Safety Commision. These fluids can replace phosphate esters in high temperature applications and are recommended as control governor fluids for steam and gas turbine. They do not have any seal compatibility issues which are inherent in phosphate ester fluids. The same seals used with mineral oils can be used with ENKLO FRDU 68. These fluids not only provide improved safety as compared to mineral oil but offer superior lubricity and antiwear properties as compared to invert emulsion (FRIE) fluids and also mineral oil based hydraulic fluids. While changing over from invert emulsion to FRDU based fluids care must be taken that there is no residual fluid or moisture present in the system. If necessary the line may be flushed with mineral oil to ensure that no traces of invert emulsion fluid remains in the system. ENKLO FRDU 68 is also approved by Director General Of Mines and Safety Dhanbad on a permanent basis. The product is also bio degradable

Shell Tellus hydraulic fluids include extra-long-life synthetic technologies capable of up to four times standard life, through to reliable products for less-demanding applications.